Digital Transformation of Manufacturing

COURSE OBJECTIVES  | ASSUMED SKILLS AND KNOWLEDGE | FUNDING INCENTIVES
 

CERTIFICATION | TRAINER'S PROFILE | APPLICATION PROCEDURE


Course Objectives

Upon completion of this course, participants will be able to:

  • Identify the key areas in Digital Transformation of Manufacturing
  • Perform basic Programmable Logic Controllers (PLC) ladder logic programming
  • Network a PLC with mobile phone through a webserver
  • Create a simple webpage to control the PLC via mobile phone web browser

Course Outline

1. Introduction to Digital Transformation of Manufacturing

  • What is Digital Transformation of Manufacturing
  • What is Digital Transformation of Manufacturing
  • Components of Digital Transformation of Manufacturing
  • Digital Transformation of Manufacturing project introduction

2. Programmable Logic Controllers (PLC)

  • Introduction to PLC programming software
  • Normally Open, Normally Closed, and other PLC instructions
  • Programming a simple conveyor belt

3. Networking and Webserver

  • Understanding the network architecture
  • Setting up the webserver
  • Setting up the router

4. Webpage

  • Creating a basic webpage using HTML
  • Adding elements to read and write PLC signals

5. Integration and Testing

  • Integrating PLC and Webpage
  • Communicating with the PLC via your mobile phone
  • Perform simple testing

6. Digital Transformation for workplace

  • How Digital Transformation can be implemented at workplace
  • How to be prepared for Digital Transformation

Suitable for

The course aims to reach a target audience of Managers, Engineers and Technicians of the manufacturing sector who like to gain an overview of Digital Transformation of Manufacturing with hands-on experience.


Assumed Skills and Knowledge

Basic computer skills are desirable, but not essential. Preferably, participants are able to bring along their smart devices.


Award / Certification / Accreditation

Certificate of Attendance


Profile of Trainer

Mr. Tony Suah is a lecturer from the School of Electrical and Electronic Engineering.  He has 10 years of working experience with broad knowledge in Programmable Logic Controller (PLC), Industrial Robots, and Web Programming.  Tony holds a Bachelor of Electrical and Electronic Engineering Degree from Nanyang Technological University.


Funding Incentives

  Singapore Citizens / SPR / Foreigners
Full Course Fees $420
Subsidy Amount -
GST $29.40
Course Fees Payable $449.40

1. All applications must be made via Online Registration at www.pace.sp.edu.sg

Course fees can be paid by the following payment modes:

Credit Cards, Internet Banking, NETS (Not Applicable for company sponsored)
a) For e-payment using Visa/Master cards and Internet Banking, please click on the ‘Make e-Payment’ button on the acknowledgement page to proceed.

b) For NETS payment, you can pay at:
Singapore Polytechnic
PACE Academy
Blk T1A, Level 1
Mon-Fri: 8:30am to 7:30pm

Cheques
c) Please make cheques payable to “Singapore Polytechnic”. Please cross the cheque and write the Registration Reference ID, Applicant Name and NRIC/FIN number on the back of the cheque. Mail the cheque to:

Singapore Polytechnic
PACE Academy
500 Dover Road
Blk T1A, Level 1
Singapore 139651

Please note that an administrative charge of $15 will be imposed for any returned cheques from the bank or financial institution.

2. All successful applicants will be notified with a letter of confirmation via email.

3. Withdrawal and Deferment

Withdrawal and deferment notice must be made in writing to the Professional & Adult Continuing Education (PACE) Academy, Singapore Polytechnic via email accordingly:

Online Courses - [email protected]
All other Courses[email protected]

For withdrawal cases, the portion of course fee to be refunded is based on the date of notice as follows:

Classroom

  • 2 weeks before the commencement of the course - Full refund
  • Less than 2 weeks before commencement of the course - 70% refund
  • On or after date of commencement - No refund

E-Learning

  • There will be no refund or transfer of course once the account has been created.

The Singapore Polytechnic reserves the right to cancel or postpone any of the courses. Applicants will be duly notified and where applicable, the full fees will be refunded.

The Singapore Polytechnic also reserves the right to amend the fees charged or the period and duration of the courses.

The data provided to Singapore Polytechnic will be kept strictly confidential and will be used for the purpose of course administration. The data may be passed on to the relevant organisations that require the information related to the course.

 

Back to the Top

IMPORTANT DATES

 

Date of course:


Day Class:
21 - 22 Jun 2017
Registration Closing Date: 07 June 2017 

 

* Registration may be closed once seats are filled up

 

COURSE DETAILS

 

Duration: 15 hours/ 2 days or 5 evenings


Venue: Singapore Polytechnic


Time/ Day
Day Class: 9am to 5.30pm (Wed - Thurs)
Evening Class: 6:30pm to 9:30pm (Mon & Tues)


 

COURSE FEE

Fees Payable:

$449.40  (including GST)

 

PAYMENT MODE

By E-Payment (VISA / Master credit/debit cards/ Internet Banking)

Please click on the ‘Make e-Payment’ button on the acknowledgement page to proceed

By NETS

Please make the payment at:

Singapore Polytechnic
PACE Academy
Blk T1A, Level 1
Mon-Fri: 8:30am to 8:00pm

HOW TO APPLY

Terms and Conditions