Course Date:
13 September 2022
Registration Period:
26 May 2022 - 20 August 2022
Duration:
7.5 hours
Time:
9:00am to 5:30pm
Mode of Training:
Facilitated Learning (F2F) / Practical Training
Venue:
Singapore Polytechnic
Course Introduction
The course will cover commonly used industrial robots, their applications, robot safety, and basic robot programming methods
Course Objective
The objective of the course is to equip learners with fundamental knowledge on industrial robots. Learners will be aware of benefits of using robots, able to perform basic robot programming, and able to select suitable robots and associated components
for different applications.
Course Outline
• Introduction to robotics which include structures and benefits of industrial robots, and relevant technical terms
• Common/Typical robot applications such as welding, painting, and pick-and-place.
• Robot system specifications and requirements for different applications
• Robot programming
Suitable for
Participants who wish to understand industrial robots in general. This includes end-users of industrial robots without any engineering background, decision-makers looking into adopting robotics technology and even participants who just want to increase
their general knowledge.
Minimum Entry Requirements / Assumed Skills and Knowledge
GCE O Level or equivalent / Basic computer literacy
Award / Certification / Accreditation
• Certificate of Attendance (electronic Certificate will be issued)
A Certificate of Attendance will be awarded to participants who meet at least 75% attendance rate
• Certificate of Performance (electronic Certificate will be issued)
A Certificate of Performance will be awarded to participants who pass the examination and meet at least 75% attendance rate
Full Fees (before GST): $290.00
GST payable for all funding-eligible applicants*: $6.09
GST payable for others: $20.30
| Applicants/Eligibility | SkillsFuture Funding | Subsidised Fee (after GST) |
| Singapore Citizens aged 40 and above1 | $261.00 | $35.09 |
| Singapore Citizens aged below 40 | $203.00 | $93.09 |
| Singapore Permanent Residents and LTVP+ Holders | $203.00 | $93.09 |
| SME-sponsored Singapore Citizens, Permanent Residents and LTVP+ Holders2 | $261.00 | $35.09 |
| Others (Full fees payable) | $0.00 | $310.30 |
*As per SSG’s policy, the GST payable is calculated based on 7% of the baseline funding subsidy of 70%
Singaporeans aged 25 years and above may use **SkillsFuture Credit balance to offset respective course fees.
1Under the SkillsFuture Mid-career Enhanced Subsidy. For more information, visit the SkillsFuture website here.
2 Under the Enhanced Training Support for Small & Medium Enterprises (SMEs) Scheme. For more information of the scheme, click here. To view SP’s list of similar funded courses, click here. Please submit the attached “Declaration Form for Enhanced Training Support Scheme for SME” together with your online application.
Funding Incentives
Please click here for more information on funding incentives.
Register HereEligible for SkillsFuture Credit
Terms and Conditions*Please note that once the maximum class size is reached, the online registration will be closed.
You may register your interest, and would be notified if there is new run. Application Procedure
1. All applications must be made via Online Registration at www.pace.sp.edu.sg
Course fees can be paid by the following payment modes:
a) Credit Cards, Internet Banking, NETS (Not Applicable for company sponsored)
For e-payment using Visa/Master cards and Internet Banking, please click on the ‘Make e-Payment’ button on the acknowledgement page to proceed.
b) For NETS payment, you can pay at:
Singapore Polytechnic
PACE Academy
c) For payment via PayNow, please enter the UEN No. T08GB0056ACET and indicate the invoice/registration number.
*With effect from 1 August 2021, cheque payment will not be available.
2. All successful applicants will be notified with a letter of confirmation via email.