Specialist Diploma in Civil Engineering (Productivity & Technology) is specifically designed to align with the SkillsFuture initiative which aims to enhance the career progression of Civil Engineering diploma graduates in the built environment sector through skills deepening and obtaining relevant certification.
The coverage of this course is in line with the Built Environment Sectoral Manpower Plan to include the emerging trend of adopting productive technologies in the built environment sector, such as Design for Manufacturing and Assembly (DfMA), Prefabricated Pre-finished Volumetric Construction (PPVC) and Building Information Modelling (BIM).
It is also designed with stackable Post-Diploma Certificates which may lead to an Advanced Diploma in Civil Engineering.
Participants are required to bring computer Notebook to when attending lessons, as you may need it to access the e-learning materials, writing reports, etc.
“We need to embrace the approach of “Design for Manufacturing and Assembly”, DfMA in short. We need to do as much precast and prefabrication as possible. We need to bring in new processes and technologies such as prefab, pre-finished volumetric construction (PPVC) or building the Lego way for suitable projects to build faster and better with fewer workers on site.” Dr John Keung, Chief Executive Officer of Building and Construction Authority (BCA), GOH for 55th Graduation Ceremony in 2015.
This course aims to deepen the knowledge and skills of fresh polytechnic graduates and civil engineering professionals in the areas of productive technologies to enhance occupational and personal competencies for better career progression in the industry.
The Specialist Diploma in Civil Engineering (Productivity & Technology) is suitable for applicants who wish to gain deeper skills and knowledge in new construction technologies and management.
Minimum Entry Requirements
Applicants should have a diploma or higher qualification in any related area of civil engineering.
Applicants with a diploma or higher qualification that not related to civil engineering will be considered on a case-by-case basis and may at the discretion of the polytechnic be invited to sit for entrance tests.
Recognition of Prior Learning
Applicants who do not meet the entry requirements may be considered for admission to the course based on evidence of at least 5 years of relevant working experience or supporting evidence of competency readiness. Suitable applicants who are shortlisted will have to go through an interview and/or entrance test. The Polytechnic reserves the right to shortlist and admit applicants.
The course is a one-year part-time programme. It consists of 2 Post Diploma Certificates (PDC) conducted over 2 semesters, 1 PDC per semester. The first PDC to start with is PDC1. The classes are conducted in the evening.
This modular certificate course is presented through lectures and practical sessions. Participants will undergo a structured 12-month programme over two semester periods. Conceptual knowledge and principles are presented in lectures while mini-projects reinforce the understanding. Learning outcomes are tested by way of written tests, quizzes, assignments and projects.
PDC 1 Certificate in Construction Productivity Management
Module 1 - Building Information Modelling for Projects
Module 2 - Construction Project Management
All participants are required to attend two evening classes per week, from 6:30 pm to 10:30 pm. There are 15 weeks in one semester.
PDC 2 Certificate in Construction Technology
Module 3 - Advanced Construction Technology
Module 4 - Measurement of Civil Engineering & Building Works
Module 5 - Precast & Prestressed Concrete Technology
All participants are required to attend three evening classes per week:
Module 3 - from 6:30 pm to 10:30 pm
Module 4 - from 6:30 pm to 9:30 pm
Module 5 - From 6:30 pm to 9:30 pm
There are 15 weeks in one semester.
Award / Certification / Accreditation
Upon completion of 2 Post-Diploma Certificates, the participant will be conferred Specialist Diploma in Civil Engineering (Productivity & Technology) from Singapore Polytechnic.
The following units / CET hours will be issued:
• 12 STUs (Structural) – Awarded by the Institution of Engineers Singapore (IES)
• 36 PDUs – Awarded by Professional Engineers Board (PEB)
• 300 CET Hours – Recognised by BCA Contractors Registration System (CRS) for A1 and A2 firms.
Click here for Funding Incentives and Fees Matters.
|SPECIALIST DIPLOMA IN CIVIL ENGINEERING (PRODUCTIVITY & TECHNOLOGY)|
|POST DIPLOMA CERTIFICATES (PDC)||SINGAPORE CITIZENS BELOW THE AGE OF 40||SINGAPORE CITIZENS AGED 40 AND ABOVE||SINGAPORE PR||ENHANCED TRAINING SUPPORT FOR SME SCHEME||WORKFARE TRAINING SUPPORT SCHEME||OTHERS / REPEAT STUDENTS|
|Certificate in Construction Productivity Management||$442.98||$295.32||$1,181.28||$304.98||$166.98||$2,953.20|
|Certificate in Construction Technology||$442.98||$295.32||$1,181.28||$304.98||$166.98||$2,953.20|
|Total Course Fees:||$885.96||$590.64||$2,362.56||$609.96||$333.96||$5,906.40|
Other Fees Payable:
|FEE DESCRIPTION||PER SEMESTER (AFTER GST)|
|SINGAPORE CITIZENS||SINGAPORE PR AND OTHERS|
|Statutory Licence Fee (CLASS)||$0.94||$0.94|
|Insurance Fee (GPA)||$0.85||$0.85|
- The fees shown (inclusive of 7% GST) are indicative as they are based on prevailing funding policies and subject to review.
- Post Diploma Module Certificate fee is payable on a semester basis.
- Post Diploma course participants who submit the withdrawal notification 2 weeks before course commencement, an administrative fee of $50 (before GST) would be levied.
Please click here for application procedure
Date of Course Commencement:
15 Oct 2018
Please click here to register your interestAcademic Calendar
1 Jun - 31 Jul 2018
* Registration may be closed once seats are filled up
PDC1 - 2 evenings per week
6:30 pm - 10:30 pm
PDC2 - 3 evenings per week
6:30 pm - 9:30 pm/10:30 pm
300 hours (1 year)
PDC to be offered: